Main Categories

Other Resources

Pages

OnlineEarnings Article Board » Cars-and-trucks » Toyota's VVT-i System Explained
Welcome Guest

Toyota's VVT-i System Explained

Author: JasonLancaster
Total views: 37
Word Count: 652
View PDF

Add2Netvouz

You probably know or have heard that engines are basically large air pumps, and the more air an engine sucks in to combine with fuel, the more power it will create through combustion. Also, an engine that can remove exhaust gases from the cylinders more efficiently will be better able to manage that power. Good air flow from one end of an engine to the other is the key to a strong, healthy engine.

There are a number of different components in the motor which can affect air flow, but the main ones are the valves in the cylinder head. These control the amount of air entering the cylinder, and the volume of exhaust air which leaves it. Intake valves open just before combustion, allowing air to flow in and mix with fuels. After this mixture has been ignited, the exhaust valves open and suck the resultant gases out of the engine. The valves are timed by a rotating shaft called the camshaft, which has lobes that push up on the valves to open and close them.

The amount of time these valves stay open, and at which point in the combustion cycle they are open, can strongly impact the drivability and power of an engine. If you want a really fast car, like a race car, you'll need to adjust the camshaft to perform well at the high RPMs needed for a powerful engine. This will mean poor performance at low RPMs, which isn't a problem for race cars. If you're looking for something with a lot of low-end torque, such as for towing, then you should adjust the camshaft accordingly to perform at low RPMs. Of course, this will also mean sacrificing high RPM performance.

Unfortunately for street vehicles, they need to be a compromise between reliability, fuel efficiency and power. Vehicles like race cars, which perform within a specific range of RPM, can afford to have poor performance outside their optimal RPM, in return for large amounts of power and high performance at their ideal RPM range. Street vehicles, however, need to function over a large range of RPMs. It would be no good if your street car stalled at every traffic light or ran out of steam whenever you tried to take the highway! Regular vehicles need to use a camshaft design that provides adequate power in the most often used range of RPMs.

These compromise camshafts aren't terribly efficient. Because they try to do so many things - from accelerating your car from a dead stop to providing performance at highway speeds, and everything in between - they don't do any one of them very well. This means that your engine burns too much fuel most of the time, while also underperforming.

Automakers have developed something called "variable valve timing" (VVT) to address this problem. Toyota's newest VVT-i engine, the Toyota Tundra's i-Force 5.7L V8, can vary the timing of the valves to match engine speed. It uses engine oil pressure to make slight adjustments to the camshaft, so that more aggressive lobe designs are used when working at higher RPMs. This makes the i-Force capable of running a camshaft configuration which provides fuel efficiency for everyday driving, but that can still turn out lots of power when you press the pedal to the floor.

The dual VVT-i in the Tundra takes things a step further by allowing the exhaust and intake valves to open at the same time at very high RPMs in order to scavenge the airflow as much as possible. This all adds up to a V8 engine that produces 381 horsepower at 5600 rpm while still generating 401 lb-ft of torque at as low as 3600 rpm. Not only that, but in the 2 wheel drive models, the Tundra gets a respectable 20 miles per gallon on the highway. Perhaps most importantly, Toyota's variable valve timing system lets you have killer horsepower without getting killed at the gas pump.